How to Make a Oragami Dragon Easy

Today we will learn how to make an Origami Dragon. Origami are often associated, like dragons in general, with Japanese Culture. Ori meaning "folding", and kami meaning "paper". In this guide, we will introduce you to the art of paper folding by teaching you how to make an Origami in the shape of a Dragon. ?

Know that Origami is good for you because it develops eye-hand coordination, sequencing skills, mathematical reasoning, spatial skills, memory, but also patience and attention. Origami also allows you to improve your fine motor skills and mental focus. Before you start, if you love these creatures, take a look at our collection of Dragon Cuddly Bears, the ideal and faithful little companion.

Dragon Plush

But then, how do you make an Origami Dragon? At first glance, it may seem difficult, so follow the step-by-step instructions to make Origami Dragon easy. ? It will take you about 10-15 minutes to make this Origami Dragon, if you take your time, but learning it can take you 30-45 minutes, depending on the skills you already have in this art. For this tutorial you will need :

?A simple square paper 15×15 cm (color of your choice)
?Or a square aluminum foil of size 15×15 cm (glossy effect)
?Of your hands and your brain (that you have no choice)

How to Make an Origami Dragon Step by Step

Step 1: Start by choosing your square paper. I recommend that you use aluminum foil to make this Origami Dragon (results in conclusion). It is easier to crease some of the folds (especially the small folds or repeated folds) and aluminum gives these dragons a cleaner and more majestic look. The paper I'm going to use is a standard green paper, it measures 15 cm long and wide.

Step 2: Fold the paper in half diagonally. Make a triangle. This will eventually form the crane-shaped base of our Origami Dragon. If you already know how to do this folding, you are not a novice, go on.

Step 3: Fold this triangle in half again. This is the simplest Origami Dragon step, repeat what you did just above.

Step 4: Open one of the triangular shutters. Open the pocket that the triangle makes. This will be folded into a square shape, also called a squash fold. Make sure that the edges are well aligned on this step, because it will be easier to perform the following steps of our Origami Dragon. Repeat this process on the other side.

Step 5: Fold all the sides of the square up to the middle fold. These folds will be undone, but their bets will be used to create the following folds for the crane base of our Origami Dragon. Make sure to fold them well, it will be easier to perform the following actions. An important detail, make sure that the pointed side is the open side. Fold the opposite side in the middle of the two folded sides (confer the image above). This will not be useful for the next step, but will be useful later.

Step 6: Open the model and flatten it into a crane base. Undo the folds that have just been made. Open the sides and flatten the existing folds, forming a diamond. Repeat the operation on the other side. Congratulations, you have made a crane base. We are approaching the final version of our Origami Dragon.

Step 7: Create a sink fold. Open the entire template. Fold the small square in the middle and gently push inward on the square, letting two sides fold inward, and letting the original folds fold into the square shape. This step of the Origami Dragon brings the model back to the square shape, but does not fold it into the base of the crane yet. A few steps must be performed before the model is put back into the crane base.

Optional Step: If you cannot or do not wish to do this folding, you can skip this step. This step consists of creating the back of the dragon. If you leave this step aside, the back will be more pointed and the legs will look slightly different, but it will still work. I recommend that you do this step if you can. If you leave the sink unfolded, skip the next step.

Step 8: Fold down the sides. Fold the top of the model down so that the fold touches the ends of the existing folds made before. Then unfold and fold the top of both flaps inward. The outer side of the Origami Dragon angled should touch the fold that has just been formed. Do the same with the other side. From there, while leaving the top as is, fold the model into the shape of a crane base.

Step 9: Folds the open flaps into an "X". The sides of these flaps must touch the right fold in the middle of our Origami Dragon. Do this on both sides of the flap, which will form an "X" shape.

Step 10: Undo and reduce the Origami Dragon. Undo the folds that have just been made and collapse the model on the folds that have just been made, stopping at the point where they meet in the center. This new flap can be placed on each side, each of them will be the wing of the dragon. Repeat on the other side.

Step 11: Fold the lower half of the model. Fold both sides by making folds. Unfold these folds to make the next step of the Origami Dragon.

Step 12: Folds inside out. By opening the side of the model, push inward, allowing the inside edge of the side to be straight with the middle. Do the same for the other side. One side will be the dragon's head and front legs, the other side will be the tail and hind legs of our Origami Dragon.

Step 13: Open a flap and retract. Lift a flap from the inverted inner fold to the top. Fold the top side towards the middle. The top of the middle will interfere, so fold this part inward (essentially making a rabbit ear fold). The Origami Dragon on the right shows the finished look. Do this on all four sides. These little triangular flap things will become the .

Origami Dragon Wings

Step 14: Bend the dragon's wings. The two flaps on each side of the model are the wings of the dragon. Fold them both upward at any angle, making sure that the bottom of the wing is folded at the exact location of the bottom of the center fold. We are nearing the end of this Origami Dragon tutorial, cheer up.

Dragon Origami Head and Front Legs

Step 15: Bend the head and front legs. Fold both sides upwards, making an inverted inner fold. Apply the same technique again, establishing the length of the neck and creating the head. Fold this point again, creating the dragon's head and horn. Fold the front flaps from the bottom to the back. Fold them in half downwards, to form the front legs.

Hind Legs of Origami Dragon

Step 16: Make the hind legs. These legs must be bent only once, in the same direction as the front legs. Use the same technique, folding down. Try to even them out by placing the dragon on a surface and checking if one leg is shorter than the other. This is not necessary, but it will help the Origami Dragon stand up better.

Origami Dragon Tail

Step 17 (optional): Crimp the tail. The dragon is finished. If you want to give a certain characteristic to the dragon's tail, create crimp folds and fold it towards the front of the dragon. This will bend the tail upwards into a curve. Once the curve is made, the crimp folds can be folded away from the dragon and give the tail a point effect.

Easy and Fast Dragon Origami Dragon

Step 18: Stylize the dragon. The Origami Dragon is finished, congratulations to you! These pictures are only small ideas of what you can do by playing a little with the dragon :

?The first is a silver dragon with horn curled down, tail slightly modified and wings folded in the shape of claws. It is called "mantis dragon" because of its resemblance to a praying mantis.
?The second, red dragon also has a slightly stretched tail and wings folded inward and flattened. Like the silver dragon, its neck and tail are folded inward again. The neck is thin enough to put a pen spring for decoration.
?The last one, a blue dragon has a more swirling effect on its tail, as well as two additional folds added to the horn. The wings are folded to give the impression of ice cubes or a glacier effect. This blue dragon looks like an ice dragon.

Note: It's easier to make cool designs on dragons folded with aluminum foil, especially if you roll the paper instead of folding it. The folds also look better when you modify the wings to make them look the way you want them to, but be careful not to fold the paper too much in the same area. Aluminum foil can fade and accidental folds will be much more noticeable. ?

Congratulations to you, you have just made an Origami Dragon. This art of paper folding can help you relax and keep you busy. If you're a fan to the core of the dragon, drop by our dragon store. You will find decorative items like the collection below, Dragon Stickers.

Dragon Dress

We hope you liked this article about The Origami Dragon for Beginners. Please don't hesitate to give us your impressions in the comments !

If you would like to read more articles similar to The Origami Dragon for Beginners, we recommend that you visit Blog

And if you liked this article about Dragons, it is sure that you will appreciate it too…

Leave a comment about The Origami Dragon for Beginners

healyinedan.blogspot.com

Source: https://dragon-planet.com/origami-dragon/

Bagikan Artikel ini